About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

Collar beam roofs: structure, costs and limitations

A collar-tie roof is a structure of rafter pairs connected by transverse timber members called collar ties, whose position and connections directly shape how the entire roof truss performs. Before deciding, it is worth establishing whether the design allows the loft to be adapted without removing the collar ties, since this element often limits layout freedom. Check that the collar-tie-to-rafter connections match the solution assumed in the calculations — random screws or extra holes can weaken the timber. The choice of structure is governed by span, loads and how forces are transferred to the walls, not by a sketch alone.

By |2026-11-14T22:27:20+01:002023-06-26|Technology and applications|Comments Off on Collar beam roofs: structure, costs and limitations

Comparing PIR, EPS, XPS and mineral wool for roof insulation

Begin comparing roof insulation with the required thermal resistance, not with board thickness. Check whether the chosen variant meets the project's fire, moisture and mechanical requirements. PIR with a lower lambda may need a thinner layer than EPS, XPS or mineral wool, which can matter where space is limited. For each product, establish the declared lambda and calculate R as thickness in metres divided by lambda. Only then compare the cost of the whole roof, including thermal bridges, fixings and flashings. Leave final thicknesses to the designer.

By |2026-11-15T02:34:51+01:002023-06-22|Technology and applications|Comments Off on Comparing PIR, EPS, XPS and mineral wool for roof insulation

How do you choose an insulated wall panel with a mineral wool core for a specific building layout?

The best wall panel is one that meets the building's requirements and can be installed correctly. Thickness alone does not determine the choice. Thermal, fire and load-bearing parameters must be checked. Dimensions are equally important. The panel module should work with the windows, door and support layout, rather than forcing random cuts. First define the function of the rooms, the temperature and the humidity conditions. Establish the fire protection and acoustic requirements. Only then compare specific panels. It is not worth choosing the thickest panel if the other properties still do not match the design.

By |2026-11-14T09:32:01+01:002023-06-19|Technology and applications|Comments Off on How do you choose an insulated wall panel with a mineral wool core for a specific building layout?

Can solar panels be mounted safely on a metal roof?

Photovoltaics can be installed on a metal roof if the structure has adequate load-bearing capacity and the mounts suit the specific covering. The information 'metal roof' alone is not enough to select the fixings. The profile, sheet thickness, supports, wind and snow loads and the method of sealing must be taken into account. It is easiest to agree these matters before the roof is installed. With an existing covering, a prior assessment of its condition is needed. Start with the structural documentation and a roof inspection. The installation adds extra weight and changes how wind and snow act. The entire load path must be assessed: from the module, through the mounts and covering, to the load-bearing elements. Good paint condition on the sheet metal is not proof of sufficient load-bearing capacity of the trusses or purlins.

By |2026-11-14T15:41:10+01:002023-06-07|Technology and applications|Comments Off on Can solar panels be mounted safely on a metal roof?

Sizing trapezoidal steel sheets for a roof or wall

Trapezoidal steel sheet is selected on the basis of where it will be used, the loads and the dimensions of the surface to be covered. The profile designation helps identify its height, but does not describe the entire geometry. To place an order, you need the cover width, the sheet length and the support layout. It is worth starting with the cutting plan before you compare prices alone. In common families, the designations T18 and T35 refer to profiles approximately 18 and 35 mm high. However, the number does not specify the corrugation pitch, the cover width or the steel thickness. Two sheets with the same abbreviated name may differ in cross-section. Therefore compare the drawing, not just the figure in the price list.

By |2026-11-14T15:39:18+01:002023-06-04|Technology and applications|Comments Off on Sizing trapezoidal steel sheets for a roof or wall

Keeping a steel frame stable during erection

The steel frame of a hall does not become safe simply because all the large columns have been erected. During assembly, some of the elements that will work together in the completed building are missing. The supports and the way loads act change. Assembly therefore requires a prepared sequence and safeguards. The temporary state must be assessed as consciously as the final structural arrangement. In a completed steel hall, the frames are connected by purlins, rails and bracing. Some elements may rely on support provided by the envelope, if such interaction has been allowed for. During assembly, some of these connections do not yet exist. The design model of the completed building therefore cannot be applied directly to every moment of the works.

By |2026-11-15T02:36:23+01:002023-06-02|Technology and applications|Comments Off on Keeping a steel frame stable during erection

What do T18 and T35 mean on trapezoidal steel sheets?

T18 and T35 indicate the trapezoidal profile family, usually linked to the rib height. They do not describe all the parameters of the sheet. To compare products you need the cross-section drawing, steel thickness, cover width, coating and intended use. Two products with a similar designation may have a different geometry. That is why ordering just a "T18 sheet" is too imprecise, especially when matching an existing roof. The letter T is commonly used to designate trapezoidal steel sheets. The number indicates the profile height family, but the exact dimension should be read from the product data sheet. Additional letters may also appear. Their meaning follows from the designations used by the given manufacturer. There is no basis for interpreting any symbol added to T35 in the same way for every supplier.

By |2026-11-14T15:41:49+01:002023-05-29|Technology and applications|Comments Off on What do T18 and T35 mean on trapezoidal steel sheets?

Six practical benefits of a metal picket fence

Metal pales are worth considering when you want a repeatable appearance and less maintenance work, but not full privacy. Before ordering, check how the system handles corners, the gate and the side gate, as these determine the even rhythm of the bays. Filling density is another key variable: a denser layout gives more privacy but increases wind load, so leave the choice of posts and foundations to the designer. Assess both sides of the element and access to a single pale.

By |2026-11-14T18:54:33+01:002023-05-28|Technology and applications|Comments Off on Six practical benefits of a metal picket fence

Estimating the cost of a sandwich panel building from the floor plan

The floor area of a hall does not indicate how many panels are needed. The perimeter, height, roof and openings determine the cladding consumption. Two halls with the same floor area can have different wall costs. It is therefore worth starting the quote from the plan and section. The price of the panels alone must later be supplemented by the full construction scope. A hall of 10 × 20 m has 200 m² of floor and a perimeter of 60 m. A building of 8 × 25 m has the same area but a perimeter of 66 m. With simple walls 4 m high, the difference in area is 24 m², even before accounting for openings and gables. This is pure geometry.

By |2026-11-14T11:58:37+01:002023-05-18|Technology and applications|Comments Off on Estimating the cost of a sandwich panel building from the floor plan

How tile-effect metal roofing coatings differ and what they protect

Choosing a metal roofing tile depends not only on colour but above all on whether the coating system suits the conditions around the house. The coating protects the steel core and gives the finish its appearance, so when comparing offers check the product data sheet: the type of organic layer, the declared resistance and the intended environment. Remember that coating thickness given in micrometres is not the same as the thickness of the steel core in millimetres. Even a good product will not guarantee durability if swarf or scratches are left behind during transport and installation.

By |2026-11-14T18:55:54+01:002023-05-14|Technology and applications|Comments Off on How tile-effect metal roofing coatings differ and what they protect
Back to top