About PiVi

This author has not yet filled in any details.
So far PiVi has created 1593 blog entries.

Roof underlay, vapour control layer or protective film?

Begin by deciding where each layer belongs within the roof assembly, not by the name on the roll. The term ‘roofing foil’ covers materials with different jobs: the membrane beneath the covering helps drain water and vapour, the layer on the interior side restricts moisture ingress, and the protective foil on sheet metal serves yet another purpose. Check the diffusion resistance, intended use and location required by the roof design. Swapping layers can trap moisture in the roof or leave gaps, so specify the material name, parameters and fixing detail on the order.

By |2026-11-15T02:34:32+01:002022-04-11|Technology and applications|Comments Off on Roof underlay, vapour control layer or protective film?

What makes coated steel sheet suitable for roofing?

The choice of roofing sheet depends on how the entire layer system matches the building's conditions, not on colour or sheet thickness alone. It is worth checking the coating documentation, the product's intended use and the maintenance requirements, especially in coastal areas or near an industrial plant. The steel core provides mechanical properties, a metallic coating protects it, and the outer layers determine colour, texture and part of the environmental resistance. Their arrangement can vary, so two similar-looking sheets may behave differently under prolonged moisture or scratching.

By |2026-11-14T22:28:00+01:002022-04-07|Technology and applications|Comments Off on What makes coated steel sheet suitable for roofing?

How do you calculate the weight of a mineral wool panel and the whole delivery?

The mass given in kilograms per square metre does not yet show the weight of the panel that has to be lifted. Its length and cover width are needed. With mineral wool panels, the differences quickly add up. It is worth calculating the individual element, the pack and the whole delivery separately. Each of these values helps to plan a different stage of the work. The weight is made up of the core, both steel facings and the other components of the product. A thicker panel usually weighs more, but thickness alone is not enough for an accurate comparison. The density of the wool and the thickness of the steel sheets matter.

By |2026-11-14T09:32:24+01:002022-04-03|Technology and applications|Comments Off on How do you calculate the weight of a mineral wool panel and the whole delivery?

Roofs without overhangs: design, advantages and detailing challenges

A roof without eaves is a system in which the slope ends at the façade rather than projecting beyond the wall. Before choosing this variant, check above all the roof-edge cross-section: the junction of covering, insulation and drainage. This detail determines whether water reaches the gutter rather than the wall or the space behind the insulation. It is also worth establishing how ventilation under the covering will work and whether service access to the gutter is provided. A visualisation alone will not show these details, so the design should clearly define the solution for each layer.

By |2026-11-14T22:26:39+01:002022-04-03|Technology and applications|Comments Off on Roofs without overhangs: design, advantages and detailing challenges

Finding the cause of a roofing sheet defect before making a claim

Before making a claim about roofing sheets, identify where the fault occurs. A problem across a whole slope calls for a different investigation from a leak at a single junction. Record the extent of the damage, when it appeared and how the sheets were stored and installed. Colour variation, rippling, leaks and rust spots can have different causes. For example, small particles of steel from drilling or cutting can rust on the surface. Keep the labels and document the condition of the roof before cleaning it.

By |2026-11-15T02:35:45+01:002022-03-31|Technology and applications|Comments Off on Finding the cause of a roofing sheet defect before making a claim

How to insulate a wall internally at the boundary and not lose too much space?

When a wall stands at the plot boundary, adding a layer on the outside may be difficult. Internal insulation then requires a good balance of space and moisture. The full thickness of the build-up must be calculated, not just the core of the board. Particular attention is needed at windows, cross walls and the junction with the ceiling and floor. Check the actual course of the boundary and the situation of the building. Do not assume that the existing façade can be thickened at will. Formal requirements and the feasibility of external works are determined separately. The conditions of a specific property may affect the available solutions.

By |2026-11-14T09:33:19+01:002022-03-29|Technology and applications|Comments Off on How to insulate a wall internally at the boundary and not lose too much space?

What to look for in modular tile-effect roofing and when to use it

A good modular metal roof tile stands out for its repeatable shape, suitable coating and clear installation instructions, but it does not guarantee less waste in every project. Before choosing, compare the cutting layout, number of joints and full covering cost for your roof. The module is only a sheet format, while the durability of the roof depends on the entire system of materials and workmanship. Check whether the small sheets really make work easier around dormers and valleys, and whether their geometry suits the roof slope.

By |2026-11-14T18:54:36+01:002022-03-21|Technology and applications|Comments Off on What to look for in modular tile-effect roofing and when to use it

How is a four-sided hipped roof constructed?

You can recognise a hip roof by its four slopes and the absence of gable walls, but its construction and costs are determined above all by the building's plan. Before choosing the covering, check whether the slopes form two trapezoids and two triangles, or whether they meet at a single point on a square plan. Send the plan and sections to the contractor rather than relying on the colloquial name. Compare the sheet cutting layout, the length of the hips and the number of flashings, because the roof area alone is not enough for a reliable estimate.

By |2026-11-14T22:27:40+01:002022-03-07|Technology and applications|Comments Off on How is a four-sided hipped roof constructed?

Is clearing the leaves enough to clean your gutters?

Clearing leaves is only the first step in cleaning a gutter. Look underneath for silt, dust and seeds, especially near the outlet. Follow the route the water takes through the bends and downpipe to its discharge point at ground level. A gutter can look clean and still overflow if the fall is incorrect, a bracket is bent or the outlet is partly blocked. If the same spot clogs each season, finding the reason for the blockage matters as much as clearing it.

By |2026-11-15T02:34:52+01:002022-02-25|Technology and applications|Comments Off on Is clearing the leaves enough to clean your gutters?

Replacing XPS with PIR during renovation: what to check

During a renovation, the choice between PIR and XPS also depends on the condition of the existing layers. Saving thickness can matter, but it should not obscure moisture and loads. PIR boards are worth considering once the old build-up has been investigated. This allows the new material to address the building's actual problem. Polyurethane insulation does not have to offer an economic advantage everywhere. Where there is plenty of space, other requirements and the cost of the entire build-up may play a greater role. Where space is limited, a thinner layer can reduce the scope of reconstruction. The real benefit must be costed, not just the slogan. In a floor being modernised, there is often no room to raise the level significantly.

By |2026-11-16T00:09:36+01:002022-02-22|Technology and applications|Comments Off on Replacing XPS with PIR during renovation: what to check
Back to top