Fibre cement roof ridge. Selection of fittings and ventilation

The ridge looks like a narrow strip at the top of the roof, but it combines several important functions. It covers the junction between the roof slopes, takes up water driven in by the wind and can provide an outlet for air from beneath the covering. Fibre cement sheets require a compatible set of fittings and fastenings here. Asbestos-free fibre cement does not form a complete roof without the correct termination. Choosing a ridge tile by colour alone overlooks the factors that determine tightness and moisture beneath the covering. The type of ridge element depends on the roof pitch and the way the two sides are joined. Some solutions have a defined adjustment range, others require the correct angle. This range is not, however, the permissible pitch of the covering itself.

By |2026-11-15T17:20:43+01:002024-05-17|Technology and applications|Comments Off on Fibre cement roof ridge. Selection of fittings and ventilation

Replacing the roof covering with Powerroof: retaining the finished loft interior

A finished attic is a strong argument for carrying out part of the work from the outside. Powerroof can make this type of thermal insulation possible, but not always without changes to details. Before renovation, access, weather, the condition of the timber and the possibility of closing the roof tightly must be checked. Recticel Powerroof is a PIR board for above-rafter thermal insulation of pitched roofs. It has an aluminium facing and a tongue-and-groove joint on all four edges. During the pre-renovation inspection, check the above-rafter Powerroof layer running over the timber structure of the pitched roof slope. Powerroof must be run over the rafters while ensuring proper fixing of the entire covering before determining the scope of demolition and preparing the old building envelope. The new surface does not solve everything: continuous insulation does not replace the elements that transfer forces from the covering to the structure.

By |2026-11-16T00:10:46+01:002024-05-11|Technology and applications|Comments Off on Replacing the roof covering with Powerroof: retaining the finished loft interior

Metal roofing and energy use: what difference does the insulation make?

The metal sheet alone does not determine energy use – the whole roof assembly matters, not just its outer layer. Before renovating, check whether the insulation sits in a separate layer or forms the core of a sandwich panel, as these are different systems. Compare the existing thermal resistance with the designed one, including thermal bridges and joint airtightness. Choosing a material with lower lambda may reduce insulation thickness, but it does not guarantee specific savings. Leave the scope of works to the designer.

By |2026-11-14T22:25:57+01:002024-04-29|Technology and applications|Comments Off on Metal roofing and energy use: what difference does the insulation make?

Tile-effect metal sheets or concrete roof tiles? Comparing cost and weight

Choose the covering based on the permissible load on the roof structure and the actual scope of work, not just the price per metre of material. Check whether the structure can carry the weight of concrete tiles, especially during renovation, where existing sheet metal does not guarantee a reserve. Compare the mass of the finished covering surface, the fixing method, waste and accessories. In the contractor's offer, look at demolition, roof structure repairs, battens, flashings and transport. In strong winds, the complete fixing system matters, not weight alone. Leave the final choice to the designer, as roof geometry and timber condition are decisive.

By |2026-11-14T18:54:49+01:002024-04-26|Technology and applications|Comments Off on Tile-effect metal sheets or concrete roof tiles? Comparing cost and weight

How will the house change after replacing roof tiles with a photovoltaic roof?

Replacing roof tiles with an integrated photovoltaic covering clearly changes the character of the house. Instead of a fine, undulating pattern, a calmer surface with longitudinal divisions appears. The cells are part of this composition, and passive fields complete the roof slope. Such a renovation can refresh an older building without adding separate panels on a mounting frame. However, it is worth refining the proportions, the colour of the flashings and the relationship between the roof and the façade beforehand. Roof tiles create a rhythm of many small elements. A steel roof integrated with cells has a different pattern and usually emphasises the direction of the roof slope more strongly. As a result, the house may look calmer and more contemporary. This is not automatically a better effect, but a specific change that is worth assessing against the whole building form.

By |2026-11-15T17:19:32+01:002024-04-22|Technology and applications|Comments Off on How will the house change after replacing roof tiles with a photovoltaic roof?

When should you choose long tile-effect metal roofing sheets and when small modules?

The choice between a made-to-measure sheet and a module starts with the roof drawing. On a wide rectangle, long elements can simplify the layout. With numerous slopes, small modules make cutting and handling easier. There is no single winner for every roof shape. It is worth comparing two covering plans for the same roof slope. Most often it concerns selecting the sheet length within a given profile. The width and rhythm of the profiling remain determined by the product. A made-to-measure order therefore does not mean any rectangle with any arrangement of waves. The length must take into account the module, the ends and the production rules.

By |2026-11-14T09:31:16+01:002024-04-17|Technology and applications|Comments Off on When should you choose long tile-effect metal roofing sheets and when small modules?

Cut-to-length sheets or modular metal roof tiles for your roof?

The format of the roofing sheet should be matched to the specific roof, not to a general rule. First check whether the slopes are simple and even, or rather full of valleys, dormers and short sections, as this determines the number of cuts and joints. The second step is delivery conditions: a long sheet needs space for unloading and lifting onto the roof, while modules are easier to distribute and store. Compare the cutting plan, transport, accessories and labour for the whole roof, not the price per piece.

By |2026-11-15T02:34:26+01:002024-04-17|Technology and applications|Comments Off on Cut-to-length sheets or modular metal roof tiles for your roof?

How do you choose the roof panel thickness for the way the garage is used?

The garage roof thickness depends on temperature, humidity and construction. There is no single panel suitable for every garage. A thin panel may not suit planned heating, while a thicker one still requires checking the supports. Pitch and available height above the door also matter. Selection should be made before ordering the frame. This is the first question that organises the choice. In an unheated building the thermal requirements differ from those of a workshop used all winter. Requirements arising from the design and function are added. The name garage alone does not determine the permissible thermal transmittance.

By |2026-11-14T12:01:26+01:002024-04-15|Technology and applications|Comments Off on How do you choose the roof panel thickness for the way the garage is used?

When is it worth choosing wall panels with 150 or 200 mm mineral wool?

Panels with 150 and 200 mm mineral wool can reduce heat loss more than thinner variants of the same family. However, greater thickness changes the weight, reveals and the way the panels connect to the plinth. It also does not automatically mean the highest fire class. The choice should be based on the requirements of the entire wall and the installation conditions. For a specific insulated wall panel with a mineral wool core, a Uc of around 0.27 W/(m²·K) at 150 mm and 0.20 W/(m²·K) at 200 mm can be found. These are data for a specific configuration. A different joint, facings or core family may give different values.

By |2026-11-14T09:32:37+01:002024-04-04|Technology and applications|Comments Off on When is it worth choosing wall panels with 150 or 200 mm mineral wool?

Metal soffits: choosing a profile and keeping the eaves ventilated

Metal soffit cladding should shield the underside of the eaves while leaving open the air path intended for the particular roof assembly. Before choosing a profile, perforation and substructure, check the eaves detail: what lies above the soffit, whether a further connection to the ventilation duct exists, and whether the edges will be properly closed. Covering the entire space with tight metal alone can worsen ventilation despite an aesthetically pleasing result. The choice of profile, including T18 or T35, requires confirming suitability for the specific assembly rather than automatically replacing a low soffit profile.

By |2026-11-14T22:27:02+01:002024-04-04|Technology and applications|Comments Off on Metal soffits: choosing a profile and keeping the eaves ventilated
Back to top