About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

Buying 100 mm second-quality wall panels: what to check

A 100 mm second-grade wall panel may be suitable for the planned wall, but the reason for the price reduction must first be established. A scratch in the coating is a different problem from a damaged joint or a detached metal sheet. Cost-effectiveness is determined by the usable dimensions of the entire batch, the ability to connect the elements, and the confirmed properties of the material. This is a trade term that does not describe a single class of defects common to all offers. It may relate to shade, surface, dimension or damage. Ask for a clear description of the reason for the price reduction. The phrase “minor blemishes” is too general if the material is to form a visible façade or a partition with a specified fire resistance.

By |2026-11-14T15:38:35+01:002024-12-23|Technology and applications|Comments Off on Buying 100 mm second-quality wall panels: what to check

Layers beneath a roof covering and what each one does

The full roof build-up is determined not by a single material but by the arrangement of layers under the covering, which provide support, protection against water, reduced heat loss and moisture control. Before buying, establish the complete cross-section with the function of each layer and the detailing at the eaves, ridge and openings, rather than selecting materials separately. Check that the instructions permit their combined use and whether a layer correct under one product will suit every product. Remember that the membrane does not replace the vapour barrier, and the anti-condensation fleece is not insulation.

By |2026-11-14T22:28:46+01:002024-12-21|Technology and applications|Comments Off on Layers beneath a roof covering and what each one does

Receiving metal fence pickets. How to check the delivery before installation?

Delivery of the pickets is a good moment for a calm inspection of the material. After installation it is harder to assess where a scratch or a length error came from. It is therefore worth checking the goods before they go onto the panels. Metal pickets should correspond to the agreed specification, and not just to a general idea of the fence colour. Receiving includes quantity, geometry, ends and surface condition. Equally important is preparing a safe unloading place so that the material is not damaged during the checking itself. Before the delivery arrives, have the list of lengths and variants to hand. With several types of pickets it is difficult to rely on memory alone. Marking of panels and material groups will help to assign the packages quickly. Also check the acceptance conditions agreed with the supplier. Receiving should be possible without haste and without accidentally moving elements over a hard surface.

By |2026-11-15T17:19:08+01:002024-12-17|Technology and applications|Comments Off on Receiving metal fence pickets. How to check the delivery before installation?

Wood-effect steel fence pickets: assessing the finish before buying

Wood-effect fence pickets combine a decorative finish with the structure of profiled steel sheet. They suit people who want a warm wood pattern without using timber pickets. The product should nevertheless be assessed realistically. Sheet metal does not have the same texture and geometry as a wooden board. Its appearance depends on the print scale, gloss, cross-section and repetition of the elements. A sample should show these features before the finish is repeated along the whole boundary. A small flat swatch shows only part of the colour and surface pattern. It does not reveal how the pattern looks across a rib. The folds in steel pickets change the lighting of the finish: some areas look brighter while others remain shaded. A sample of the finished picket is therefore more useful than a picture of the finish alone.

By |2026-11-15T17:18:50+01:002024-12-14|Technology and applications|Comments Off on Wood-effect steel fence pickets: assessing the finish before buying

How to check the quality of tile-effect metal roofing before you buy

Judge the quality of a metal roofing tile by the consistency of several elements, not by a single impression. Before buying, check whether the product data sheet identifies the profile, states the steel thickness and grade, and gives overall dimensions, coverage area and pressing parameters. Inspect how sheets join in their intended laying direction and compare the conditions of use, including the minimum roof pitch. Similar-looking samples do not prove the same construction. Also consider delivery and installation, because well-made material can be damaged before it is laid on the roof.

By |2026-11-14T18:54:31+01:002024-12-10|Technology and applications|Comments Off on How to check the quality of tile-effect metal roofing before you buy

How loads travel through a steel building from roof to foundations

In a photo of a steel hall, the large columns and the roof are the easiest things to notice. Less visible are the elements that tie them together into a single three-dimensional system. It is their interaction that allows loads to be transferred to the ground. To understand the structure, you do not need to calculate the profiles yourself. It is enough to know the path the forces take and why breaking that path can change how the building behaves. A steel hall is acted upon by its own weight, the envelope, snow and wind. Loads related to use and equipment are added. Some forces are vertical, some horizontal. Wind can both press a section of the enclosure against its supports and pull it away from them. That is why the design is not based solely on assessing the weight resting on the roof.

By |2026-11-15T02:35:46+01:002024-11-27|Technology and applications|Comments Off on How loads travel through a steel building from roof to foundations

What should you do with the chimney when planning a photovoltaic roof?

The chimney must be taken into account in the design of a photovoltaic roof as an obstacle, a source of shade and a point requiring weathertight flashing. It does not have to undermine the point of BIPV. In a steel system, a passive zone can be planned around it while maintaining a consistent appearance of the roof slope. Renovation is also an opportunity to assess the condition of the chimney. However, its repair, reconstruction or removal should be decided by the function and requirements of the building, not only by the layout of the modules. First, it is necessary to establish which flues the chimney serves and whether all of them are in use. It may handle flue gases, smoke or room ventilation. Shutting down one heating appliance does not automatically mean that the entire chimney is redundant.

By |2026-11-15T17:19:46+01:002024-11-24|Technology and applications|Comments Off on What should you do with the chimney when planning a photovoltaic roof?

What to specify when ordering starter profiles for cladding

Ordering starter profiles requires knowing the cladding they are meant to begin. The wall length alone is not enough. You need details about the panels, their layout and the base detail. It is also worth establishing whether the item being ordered has a mounting function or merely covers the lower edge. This distinction affects the cross-section and material. A well-prepared list allows the correct parts to be delivered before the installation team arrives. The supplier should receive information about the type of panel for which the starter profiles are intended. The thickness and the construction of the joint are important. Equally important is the direction of installation on the wall. An item selected for one layout does not necessarily fit another, despite a similar width.

By |2026-11-15T02:36:44+01:002024-11-23|Technology and applications|Comments Off on What to specify when ordering starter profiles for cladding

Is an attached garage a good place for an integrated PV roof?

An attached garage can be a good place for an integrated photovoltaic roof covering. A new roof is easier to plan from the outset, and its appearance can be matched to the house right away. This does not mean, however, that every extension has the right pitch and solar exposure. It is worth comparing its potential with the main roof slope, checking for shading from a taller building and establishing how the system will be connected. Only then can a sensible active area be chosen. With a new garage, the geometry, the substrate and the cable route for the chosen system can be designed from the start. There is no need to adapt the active covering to a worn-out roof. Panels with cells and passive elements can form a coherent whole, and the electrical part can be incorporated into the shared construction schedule.

By |2026-11-15T17:20:00+01:002024-11-23|Technology and applications|Comments Off on Is an attached garage a good place for an integrated PV roof?

How to plan a wall made of insulated wall panels with a mineral wool core, from dimensions to handover?

A wall made of panels with mineral wool is built efficiently when its divisions and details have been agreed in advance. Thermal, fire and load-bearing requirements must be combined with the building's dimensions. Most problems arise at openings and edges. A good plan therefore covers the entire system, from the foundation to the connection with the roof. Determine the pattern of use, temperature and humidity. Establish the fire and acoustic requirements. This information allows you to select the panel group that is worth comparing further. Do not start with a random thickness available on promotion.

By |2026-11-14T09:32:59+01:002024-11-17|Technology and applications|Comments Off on How to plan a wall made of insulated wall panels with a mineral wool core, from dimensions to handover?
Back to top