+48 500 409 109

Buying 100 mm second-quality wall panels: what to check

A 100 mm second-grade wall panel may be suitable for the planned wall, but the reason for the price reduction must first be established. A scratch in the coating is a different problem from a damaged joint or a detached metal sheet. Cost-effectiveness is determined by the usable dimensions of the entire batch, the ability to connect the elements, and the confirmed properties of the material. This is a trade term that does not describe a single class of defects common to all offers. It may relate to shade, surface, dimension or damage. Ask for a clear description of the reason for the price reduction. The phrase “minor blemishes” is too general if the material is to form a visible façade or a partition with a specified fire resistance.

By |2026-11-14T15:38:35+01:002024-12-23|Technology and applications|Comments Off on Buying 100 mm second-quality wall panels: what to check
Read More

Layers beneath a roof covering and what each one does

The full roof build-up is determined not by a single material but by the arrangement of layers under the covering, which provide support, protection against water, reduced heat loss and moisture control. Before buying, establish the complete cross-section with the function of each layer and the detailing at the eaves, ridge and openings, rather than selecting materials separately. Check that the instructions permit their combined use and whether a layer correct under one product will suit every product. Remember that the membrane does not replace the vapour barrier, and the anti-condensation fleece is not insulation.

By |2026-11-14T22:28:46+01:002024-12-21|Technology and applications|Comments Off on Layers beneath a roof covering and what each one does
Read More

Wood-effect steel fence pickets: assessing the finish before buying

Wood-effect fence pickets combine a decorative finish with the structure of profiled steel sheet. They suit people who want a warm wood pattern without using timber pickets. The product should nevertheless be assessed realistically. Sheet metal does not have the same texture and geometry as a wooden board. Its appearance depends on the print scale, gloss, cross-section and repetition of the elements. A sample should show these features before the finish is repeated along the whole boundary. A small flat swatch shows only part of the colour and surface pattern. It does not reveal how the pattern looks across a rib. The folds in steel pickets change the lighting of the finish: some areas look brighter while others remain shaded. A sample of the finished picket is therefore more useful than a picture of the finish alone.

By |2026-11-15T17:18:50+01:002024-12-14|Technology and applications|Comments Off on Wood-effect steel fence pickets: assessing the finish before buying
Read More

How to check the quality of tile-effect metal roofing before you buy

Judge the quality of a metal roofing tile by the consistency of several elements, not by a single impression. Before buying, check whether the product data sheet identifies the profile, states the steel thickness and grade, and gives overall dimensions, coverage area and pressing parameters. Inspect how sheets join in their intended laying direction and compare the conditions of use, including the minimum roof pitch. Similar-looking samples do not prove the same construction. Also consider delivery and installation, because well-made material can be damaged before it is laid on the roof.

By |2026-11-14T18:54:31+01:002024-12-10|Technology and applications|Comments Off on How to check the quality of tile-effect metal roofing before you buy
Read More

What to specify when ordering starter profiles for cladding

Ordering starter profiles requires knowing the cladding they are meant to begin. The wall length alone is not enough. You need details about the panels, their layout and the base detail. It is also worth establishing whether the item being ordered has a mounting function or merely covers the lower edge. This distinction affects the cross-section and material. A well-prepared list allows the correct parts to be delivered before the installation team arrives. The supplier should receive information about the type of panel for which the starter profiles are intended. The thickness and the construction of the joint are important. Equally important is the direction of installation on the wall. An item selected for one layout does not necessarily fit another, despite a similar width.

By |2026-11-15T02:36:44+01:002024-11-23|Technology and applications|Comments Off on What to specify when ordering starter profiles for cladding
Read More

Choosing roof panel thickness after surveying the building

Choosing the roof panel thickness begins with the building's function and ends with a check of the entire building envelope. Thermal requirements, support spacing and roof geometry are needed. A thicker panel also changes the flashings and the length of the fasteners. It is therefore worth choosing it before ordering the remaining components, not only at the time of delivery. Determine whether the interior will be heated continuously, periodically, or remain cold. Add the expected temperature and the pattern of use. A workshop with frequently opened gates performs differently from a closed warehouse. Moisture from processes, wet vehicles or intensive work also affects the requirements for the building envelope and ventilation.

By |2026-11-14T15:38:34+01:002024-10-14|Technology and applications|Comments Off on Choosing roof panel thickness after surveying the building
Read More

Façade renovation with Thermano ETICS: thickness, sills and the render substrate

Changing the façade thickness affects window sills, flashings and the proportions of the reveals. Thermano ETICS should be assessed as such a complete system. During the renovation, the load-bearing capacity of the old substrate must also be confirmed, as must the way the new thermal insulation is connected to the existing elements. Thermano ETICS is a composite board made of PIR with an outer EPS layer 20 mm thick. The PIR part has gas-tight multilayer facings containing aluminium. During the pre-renovation inspection, check the cross-section of the façade board with the PIR core and the outer EPS layer 20 mm thick. The surface of Thermano ETICS must be identified as the outer EPS layer belonging to the composite before determining the scope of demolition and preparing the old building envelope.

By |2026-11-16T00:10:32+01:002024-10-11|Technology and applications|Comments Off on Façade renovation with Thermano ETICS: thickness, sills and the render substrate
Read More

Which roof coverings suit contemporary house designs?

The choice of roofing for a contemporary house depends above all on the roof pitch, the structure and how the details are resolved, not on how it looks in a photograph. Before comparing materials, check the project's provisions for colour and geometry and the local requirements; only within those limits should you assess modular metal tiles, trapezoidal sheeting or sandwich panels. Leave the final selection to the designer, since it is the designer who verifies whether a given profile and format suit the specific roof slope and its edges.

By |2026-11-14T18:55:48+01:002024-09-19|Technology and applications|Comments Off on Which roof coverings suit contemporary house designs?
Read More

How to compare panel prices without ordering more than you need

The lowest price per metre of panel does not necessarily mean the cheapest wall. If the lengths fit the building poorly, some of the material will end up as waste. Transport, flashings and fixings come on top. A favourable purchase means comparing a complete set with the required parameters. Only then does a discount have real significance. First, note the required core, thickness, facings and coatings. Establish the necessary parameters and the application. Without this, you might accidentally compare a wall panel with a roof panel, or first-grade material with a batch of unspecified deviations.

By |2026-11-14T11:59:19+01:002024-09-10|Technology and applications|Comments Off on How to compare panel prices without ordering more than you need
Read More

Choosing between tile-effect metal roofing and bitumen shingles

Compare tile-effect metal roofing and bituminous shingles as complete roof systems. They differ in format, substrate and installation method. Pitch, roof plane geometry and attic conditions all matter. Metal roofing can reduce the weight of the covering itself, while the small elements of shingles make work easier on certain shapes. Neither material removes the need for a correct substrate, ventilation and flashings. Tile-effect metal roofing is usually installed on a batten and counter-batten grid. Batten spacing corresponds to the profile and the module length. The substrate must form an even plane and be properly supported at the eaves. The underlay drains away water that may appear beneath the covering. Its selection and installation method are part of the overall roof design.

By |2026-11-14T15:40:19+01:002024-08-20|Technology and applications|Comments Off on Choosing between tile-effect metal roofing and bitumen shingles
Read More
Back to top