Technology and applications2026-11-15T17:17:10+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Technology and applications

Izoprofil.pl explores how building materials work together. Sandwich panels, PIR insulation and trapezoidal sheets depend on their supports, joints, fixings and drainage. The guides explain how product properties affect use on roofs, walls and insulation assemblies. They help you read the documentation, identify limits and prepare questions for your designer or contractor. You can also look up detailing, common faults and preparing materials for installation. Use the technical issue on your project to choose an article, then check the instructions for your specific product. Similar-looking components may have different requirements.

Is Utherm Wall LE suitable for a wall being renovated?

When renovating, Utherm Wall LE must be matched to the actual position of the insulation within the wall. Use in a cavity does not by itself settle the question of installation from the inside. The moisture state of the masonry and the new temperature distribution require assessment before the building element is closed. Utherm Wall LE is a PIR board with a gas-tight laminate on both sides. The manufacturer describes it as a solution for cavity walls. The terms “polyurethane boards” and “polyurethane foam” are broader than the precise PIR product designation. The pre-renovation inspection should cover the intended use of Utherm Wall LE for the insulation layer of a cavity wall. When surveying the existing build-up, a distinction must be made between Wall LE with laminate and a product combined with a gypsum facing.

How much do T18 and T35 trapezoidal steel sheets weigh?

The weight of trapezoidal sheet is determined not by the profile symbol alone but by steel thickness, geometry and the unit given in the table. Before calculating, check whether the value refers to a square metre of coverage, a metre of length or kN/m², because these units are not interchangeable. In the available table, T18 at 0.50 mm thickness is given as 0.041 kN/m², while the indicated T35 variant of the same thickness is 0.044 kN/m²; these are examples, not universal values. Leave the choice of design data to the designer.

Telling structural C-sections apart from plasterboard framing profiles

A cross-section resembling the letter C appears in many construction products. A similar shape does not, however, mean a shared application. A channel section for a hall structure and a profile that is part of a drywall system are made for different tasks. They may differ in geometry, material, thickness and documentation. When buying, therefore, start with the function of the element and only then with its name. The name indicates the arrangement of the web and flanges. It does not specify the permissible load or span. This family includes both structural elements and profiles for other purposes. Each product should be assessed in accordance with the documentation and scope of application. Its properties must not be attributed on the basis of appearance alone.

What should a roof renovation plan combined with photovoltaics include?

A plan for replacing a roof with a photovoltaic roof should describe the entire renovation, from assessing the old structure to commissioning the installation. The number of panels and the declared capacity alone are not enough. In an integrated system, the covering and the energy-generating part are interconnected, so they need a shared work schedule. A well-prepared document makes it easier to compare quotes, control costs and carry out acceptance. It also allows a clear separation of the necessary elements from the extras chosen by the owner. The plan should start with what is actually on the building. Measurements, photos and a description of the covering, layers and available structure are needed. Previous leaks and repairs should be noted.

Five benefits of metal cladding and sandwich panel façades

Sheet metal and sandwich panels are not the same, so the choice begins by checking whether the wall is to be cladding only or also insulation. It is worth comparing the load-bearing capacity of the substrate, the geometry of the frame, the fixing method and access for later repairs. Speed of installation alone does not determine when the façade is closed, because deliveries, openings and corners also matter. The five benefits cited for such façades depend on the design, so structural and material decisions should be left to the designer.

Reducing the risk of wind damage to a roof

A roof's wind resistance depends on the entire load path, not just the covering. It is therefore worth checking whether the design and workmanship account for the local wind-load conditions, especially at edges and corners. The key decision variable is whether the fastener layout matches the documentation for the specific building, rather than the number of screws per square metre alone. The condition of the substrate and the seating of fasteners matter just as much for safety. When renovating, assess the whole force path: from the sheet through the screw to the batten or purlin.

Back to top