Technology and applications2026-11-15T17:17:10+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Technology and applications

Izoprofil.pl explores how building materials work together. Sandwich panels, PIR insulation and trapezoidal sheets depend on their supports, joints, fixings and drainage. The guides explain how product properties affect use on roofs, walls and insulation assemblies. They help you read the documentation, identify limits and prepare questions for your designer or contractor. You can also look up detailing, common faults and preparing materials for installation. Use the technical issue on your project to choose an article, then check the instructions for your specific product. Similar-looking components may have different requirements.

How do you choose insulation for a house made of ceramic blocks to suit the wall thickness?

A wall made of ceramic blocks does not have a single common thermal parameter. What matters is the type of block, the wall thickness and how the joints are made. Insulation is selected only on this basis. In practice, it must also fit at the windows, the eaves and the plinth. Choosing the number of centimetres alone does not complete the design. In a new house, refer to the material schedule and check what was actually built in. In an older building, an inspection opening at a window or door opening can help. Do not determine thermal properties solely from the colour of the ceramic. Blocks of similar appearance may have a different arrangement of voids and a different purpose.

Ordering galvanised Z-sections takes more than a height measurement

“I need a Z-section of a given height” is a common way to start an enquiry. But further information should follow. Z-sections with a similar external dimension can differ in flange width, thickness and lips. The hole layout may also be different. If the profile is to work with an existing element or fit into a lap, these details become decisive. A good order describes the entire cross-section and its function. The opposing arrangement of the flanges creates the characteristic Z shape. In many systems their widths are deliberately different. This allows suitably matched sections to be joined by sliding the narrower part into the wider one. This detail must be taken from the documentation for the specific solution. Not every Z-profile has identical proportions.

Profiled tile-effect metal roofing: characteristics and applications

The suitability of profiled metal roof tiles depends on the steel parameters, coating and installation instructions for the specific solution, not on the wave shape alone. Before buying, it is worth checking the cross-section and side view to distinguish wave height from step height. You should also confirm the minimum roof pitch required for the given profile and assess the number of obstacles, such as valleys, chimneys and windows, which may influence the choice of sheet format.

IKO enertherm MG in renovation beneath synthetic membranes

When the old membrane is removed, the MG boards are exposed with the fleece locally damaged. The condition of the surface must be assessed before choosing how to reinstate the covering. The appearance of the core alone does not decide whether a board can be reused. The repair should take account of the requirements of the new layer and the extent of the actual damage. In a renovation, the scope described as a flat roof under a synthetic membrane requires an investigation of the old layers. The first difficult place to inspect is the interface between the membrane and the fleece facing of the boards. It is not worth determining the thickness of IKO enertherm MG solely on the basis of an old drawing. The measurement should cover the thickness of the insulation and the condition of the surface before the covering is installed, taking into account changes made during earlier work.

Choosing trapezoidal steel sheets for a façade

First decide whether the trapezoidal sheet is only a screen for a ventilated façade or part of another designed wall assembly — this determines the subframe and details. Check the steel thickness, coating, cover width and sheet orientation, not just the rib height. Inspect the cross-section and confirm that the coated side faces the exterior. Assess the profile choice on a larger section of wall, with windows and corners, because a small sample does not show the proportions.

Made-to-length tile-effect metal roofing for traditional houses

Base the choice of cut-to-size metal roofing on the building's form rather than on a catalogue pattern alone. Begin by checking whether long sheets will genuinely simplify covering straightforward slopes or instead force numerous cuts at dormers and breaks. The final effect depends on the rhythm of the profiles, the colour and the edge finish, so compare a sample with the actual boarding, joinery and flashing in daylight. Before ordering, confirm on the built structure the lengths of slopes, eaves, ridges and hips, and analyse the cutting plan against a modular variant.

Back to top