About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

How can an investor combine panel selection, building geometry and budget?

Panels should be selected together with the building envelope. Wall height, the number of gates and the roof shape change the quantity of material and details. Only against this background can cores and prices be sensibly compared. The investor does not have to calculate load-bearing capacity themselves, but should prepare clear requirements and know what scope they are paying for. Define what will happen inside the building. A workshop heated continuously requires different conditions from an unheated storage shelter. Moisture, chemicals and the expected temperature are important. Information about floor area alone is not enough to select a panel.

By |2026-11-14T12:00:14+01:002025-03-21|Technology and applications|Comments Off on How can an investor combine panel selection, building geometry and budget?

What to check when assembling steel frame connections

A strong section alone is not enough if the forces cannot be transferred correctly to the next element. That is why connections are among the key points of a steel structure. In a steel hall, bolts, gusset plates, welds and anchors come together here. Each of these parts has a specific function. The quality of a joint is not demonstrated by the number of fasteners alone, nor by the fact that it looks solid once assembled. A connection can transfer different types of forces and have a defined stiffness. In a portal frame, the joints at the eaves and ridge participate in the behaviour of the whole system. Elsewhere, the design may specify a connection with a different function. A detail should not be copied simply because it joins sections of similar dimensions.

By |2026-11-15T02:35:51+01:002025-03-19|Technology and applications|Comments Off on What to check when assembling steel frame connections

Storing tile-effect roofing sheets from delivery to installation

Before installation, roofing sheets need protection, and their condition is already determined at delivery. Check that markings match, count the elements and look for visible dents, abrasions and signs of damp; photographs before unloading and after placing the material will help with any later report. Set the packs on dry, stable and ventilated ground, away from running water, and do not leave them in tight foil in the sun. The permitted storage time and stacking arrangement depend on the specific product, so agree a plan with the team before the vehicle arrives.

By |2026-11-15T02:33:37+01:002025-03-19|Technology and applications|Comments Off on Storing tile-effect roofing sheets from delivery to installation

How to assess a roofer before hiring one

A good roofer can explain how they will resolve difficult areas on the roof and prices a specific scope of works. They work according to the documentation for the chosen covering, check the substrate and plan protective measures. Photos of finished houses alone are not enough for assessment. It is worth asking about flashings, ventilation, acceptance of covered layers and the rules for settling additional works. The way these answers are given says a lot about the quality of the collaboration. Experience with one material does not automatically mean knowledge of every system. Modular tile-effect metal roofing, long sheet metal cut to size and insulated sandwich roof panels have different details. Ask for a description of similar projects. Work of a comparable degree of difficulty says the most, not just the number of years in business.

By |2026-11-14T15:41:28+01:002025-03-10|Technology and applications|Comments Off on How to assess a roofer before hiring one

What does a mineral wool panel offer and what constraints does it impose on site?

A mineral wool panel combines steel facings with a mineral core. It can be a good choice for specific fire and acoustic requirements. However, it demands attention to weight, transport and protection against moisture. It is worth assessing it against the whole wall, because one favourable parameter does not determine suitability for the building. The facings and core work together as a single element. The panel can form a finished internal and external surface together with the insulation layer. The large format reduces the number of separate operations carried out on site. This is particularly convenient with a regular structural grid.

By |2026-11-14T09:32:04+01:002025-03-10|Technology and applications|Comments Off on What does a mineral wool panel offer and what constraints does it impose on site?

Will white PIR wall panels 100 mm thick and 2480 mm long fit your wall?

A small batch of white PIR wall panels 100 mm thick may be useful in a small building. First, however, you need to check whether the 2480 mm length fits the walls and details. Second-grade material also requires an assessment of the actual deviations. Colour and thickness alone do not tell you how much material you will use or whether it can be installed tightly. The description should indicate a wall panel, PIR core, 100 mm thickness and 2480 mm length. The cover width, facing thicknesses and type of coating are also needed. The term “white” does not replace the shade and surface finish code.

By |2026-11-14T11:59:20+01:002025-03-07|Technology and applications|Comments Off on Will white PIR wall panels 100 mm thick and 2480 mm long fit your wall?

BauderPIR FA when adding insulation to an existing roof

The replacement of the insulation with FA is carried out in stages while part of the covering remains in place. Large boards must be laid out so that they do not obstruct the temporary closure of the working boundary. The measured survey should allow for the laps and the irregular perimeter of the exposed area. The nominal rectangle taken from the original drawing may not match the actual cutting layout. In a refurbishment, the area described as the insulation of a large, regular roof field requires an investigation of the old layers. The first difficult point to inspect is the milled edge of the large-format board. The thickness of BauderPIR FA should not be determined on the basis of an old drawing alone. The measurement should cover the area of the actual covering and the widths of the strips at the perimeter, allowing for changes made during earlier work.

By |2026-11-16T00:11:16+01:002025-03-06|Technology and applications|Comments Off on BauderPIR FA when adding insulation to an existing roof

What to check in the attic before converting the roof for photovoltaics?

The attic says a great deal about the condition of the roof before it is converted for photovoltaics. Stains, a smell of damp, unevenness and traces of repairs help establish the scope of work. It is worth inspecting them before ordering the covering, not only once it has been removed. A BIPV system can give the house a new function and a coherent appearance. It will bring the greatest benefit when the renovation also resolves earlier problems hidden beneath the roof slope. The areas around chimneys, roof windows and the junctions between the roof slope and the walls must be inspected. Water marks may indicate a leak, but are sometimes associated with condensation. The conditions in which they appear are important. Information on whether a stain grows after rain, during a thaw or on cold days helps the person assessing the roof identify a possible cause.

By |2026-11-15T17:19:30+01:002025-02-28|Technology and applications|Comments Off on What to check in the attic before converting the roof for photovoltaics?

Sigma or channel sections? Comparing cold-formed steel profiles

A more complex cross-section is not necessarily the best in every structure. Sigma profiles have additional web bends, while C-sections have a simpler geometry. Both solutions can be useful if they match the working conditions. However, a reliable comparison requires a common task. You need to know the span, loads, support method and expected use. Only then do mass and price start to say something about cost-effectiveness. Roof purlins should be compared with purlins of the same required function. A wall rail working in a different arrangement is not a good reference point. The spacing of elements is also important. A lighter single profile does not have to mean a lower mass for the whole structure if more of them have to be used.

By |2026-11-15T17:15:46+01:002025-02-27|Technology and applications|Comments Off on Sigma or channel sections? Comparing cold-formed steel profiles

How many panel fasteners do you need when the fixing pattern varies?

There is no single number of screws per metre of panel that suits every wall and roof. Fixings are determined by loads, the panel and the structure. They are counted at points of support and connection. A figure per m² can help with a schedule, but only after the selection has been made. It should not serve as a ready-made layout instruction. The main fixings transfer loads from the panel to the supports. Other screws may connect the intended parts of the lap, and yet others fix the flashings. These are not freely interchangeable elements. Counting them all as one item makes it harder to check whether the set is correct.

By |2026-11-14T12:00:53+01:002025-02-27|Technology and applications|Comments Off on How many panel fasteners do you need when the fixing pattern varies?
Back to top