What role does the aluminium facing play in internal insulation?

The aluminium facing on a PIR board affects the passage of water vapour through the insulation layer. However, it does not in itself seal joints, corners or service penetrations. With internal insulation, the continuity of the entire system is what matters. Equally important are the condition of the existing masonry and its ability to dry out after the build-up has been installed. The metallic surface may be a multi-layer facing incorporating aluminium, paper and plastic. It should not be treated like any kitchen foil, nor should identical properties be assumed for every shiny product. The declared parameters of the specific product and the solution intended for the wall are what count.

By |2026-11-14T09:33:02+01:002025-05-14|Technology and applications|Comments Off on What role does the aluminium facing play in internal insulation?

Buying sandwich panels in Lower Silesia: how to compare delivered costs

When buying panels in Lower Silesia, the final price of the delivered set matters. Distance from the warehouse is only part of the bill. You need to check available lengths, access and the unloading method. In a small order, these items can change the comparison result more than a small discount per square metre of material. Note the panel type, core, thickness, facings and colour. Provide the lengths and number of pieces. If you do not have a ready cutting plan, attach a plan and cross-section with openings. Information about the building's floor area alone is not enough to prepare a comparable quote.

By |2026-11-14T11:59:17+01:002025-05-11|Technology and applications|Comments Off on Buying sandwich panels in Lower Silesia: how to compare delivered costs

What layers make up tile-effect metal roofing and what does each one do?

Tile-effect metal roofing is a profiled sheet whose shape echoes rows of roof tiles. Stiffness comes from the steel and the geometry of the pressings. Appropriate protective layers guard against corrosion. The sheet alone does not make up the whole roof, however. It needs support, fixings and correctly made connections. The basis is a thin steel core. On it sit protective layers, including metallic protection and coatings that prepare the surface and finish it. The build-up depends on the specific product. The coating on the underside may differ from the decorative outer layer.

By |2026-11-14T09:31:41+01:002025-05-10|Technology and applications|Comments Off on What layers make up tile-effect metal roofing and what does each one do?

Multi-pitched roofs: structure, limitations and choice of covering

A multi-pitched roof requires careful planning of the junctions between roof slopes. Roof valleys, hips and short sections increase the number of cuts and flashings. Modular tile-effect metal roofing can make work on such a form easier, but it does not eliminate waste or difficult details. Before choosing the covering, it is worth checking the pitches of all roof sections, the layout of the sheets, ventilation and the method of water drainage from the roof valleys. These elements determine the costs and tightness. A multi-pitched roof has external hips and internal roof valleys. At a hip, water flows onto the adjacent slopes. A roof valley collects it from two sides and leads it downwards. These are different tasks, which is why they require different details.

By |2026-11-14T15:41:35+01:002025-05-08|Technology and applications|Comments Off on Multi-pitched roofs: structure, limitations and choice of covering

How do you calculate the coverage of T7 steel sheet and choose it for a small area?

T7 steel sheet has a very low profile. This allows it to create a subtle pattern for soffits, façades or protective cladding. For a small area, an accurate layout is important. One additional sheet can noticeably change the order cost. Before calculating, however, the coverage and intended use of the chosen variant must be checked. This refers to a rib height of approximately 7 mm. It is not the steel thickness or information about load-bearing capacity. Different product families may have different corrugation spacings, widths and edges. Therefore the T7 designation does not replace a technical drawing.

By |2026-11-14T09:31:43+01:002025-05-01|Technology and applications|Comments Off on How do you calculate the coverage of T7 steel sheet and choose it for a small area?

Roof insulation: comparing PIR, EPS, XPS and mineral wool

The choice of roof insulation depends primarily on the available thickness and the required thermal resistance, not on the material name alone. Check whether a layer with the necessary lambda can fit in the given space and whether the product has declared mechanical and fire properties for the specific assembly. PIR can achieve high thermal resistance with a relatively thin layer, but it does not replace XPS in areas of prolonged water exposure. EPS comes in many variants, while mineral wool stands out for fire and acoustics. Compare complete options, not just board prices.

By |2026-11-14T22:29:21+01:002025-04-25|Technology and applications|Comments Off on Roof insulation: comparing PIR, EPS, XPS and mineral wool

What are purlins and how do they support a roof?

Purlins are beams that support roof elements and transfer loads to the rest of the structure. Before any work begins, it is worth establishing whether a given beam acts as a purlin or is merely a floor beam or collar tie – misidentification can lead to dangerous decisions. It is also essential to check how the entire system interacts with the covering and the main supports, since the profile name or beam height alone does not determine load capacity. The designer should verify material, cross-section, spacing, connections and bracing before any modernisation or re-roofing is planned.

By |2026-11-14T22:27:24+01:002025-04-18|Technology and applications|Comments Off on What are purlins and how do they support a roof?

When does a pitched roof need ventilation elements in the roof covering?

Additional ventilation elements in the roof slope are needed when the standard inlet at the eaves and outlet at the top do not provide airflow through all spaces under the covering. It is worth checking whether the channel is clear along its entire length, especially at roof windows, chimneys and interrupted sections. The presence of counter-battens alone does not guarantee flow, and insulation placed too high or accidental sealing can block it. The choice of element depends on the type of covering and the effective flow cross-section, so the decision on placement is left to the designer.

By |2026-11-14T22:27:27+01:002025-04-17|Technology and applications|Comments Off on When does a pitched roof need ventilation elements in the roof covering?

The main structural elements of a hipped roof

A hipped roof requires distinguishing between the hip and pavilion forms, as this determines the arrangement of the hip rafters and the support. In a classic hipped roof over a rectangular building the ridge is horizontal and the sloping hips divide the slopes; in a pavilion roof the triangular slopes meet at a single point. When reading the plan, check above all the junctions between slopes and how loads are transferred to the walls or the structure below. It is these nodes, not the regular shape alone, that determine the later details and ventilation.

By |2026-11-14T22:27:22+01:002025-04-09|Technology and applications|Comments Off on The main structural elements of a hipped roof

Four-sheet junctions in fibre cement roofing: why corners are mitred

Where successive rows meet, the sheets overlap in two directions. If every corner is left full despite the required trimming, a build-up of material occurs. Fibre cement sheets may then fail to sit properly and remain under stress. Preparing the corners is not cosmetic. It is part of the roofing method. Asbestos-free fibre cement must be ordered with a specified version of edge treatment, and the installation plan should show which corners are to remain intact. At a normal side joint, one sheet overlaps the other. A similar situation occurs between the lower and upper rows. At the intersection of these joints, more layers of material build up. Without the solution provided in the system, the upper sheet may be lifted.

By |2026-11-15T17:20:26+01:002025-04-07|Technology and applications|Comments Off on Four-sheet junctions in fibre cement roofing: why corners are mitred
Back to top