About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

Roofing panels and sheets: what to check before choosing a covering

Before choosing panel or sheet roofing, first establish the roof pitch, the method of support and whether the building will be heated, and only then compare products. Check the coverage width, the minimum pitch for the specific product and all the layers beneath the covering. A trade name can be misleading: a panel may mean a small module of tile-effect sheeting, a long metal sheet or a sandwich panel, so state the full category, profile shape and intended roof build-up in your enquiry.

By |2026-11-14T22:27:44+01:002024-06-01|Technology and applications|Comments Off on Roofing panels and sheets: what to check before choosing a covering

How to plan and cost a sandwich panel garage

The cost of a panel garage depends on more than its floor area. You need to account for the walls, roof, door and structure. On a small plot, access and assembly space also matter. A good cost estimate starts with dimensions and how the garage will be used. Only then do you compare material prices. Start with the car, walkways and space for opening the doors. Add planned shelving and a work area. External dimensions are not usable dimensions. The structure, panels and flashings take up part of the space. Also check the entry height after allowing for the door mechanism.

By |2026-11-14T11:58:29+01:002024-06-01|Technology and applications|Comments Off on How to plan and cost a sandwich panel garage

What needs to be checked before choosing an insulated wall panel with 100 mm mineral wool?

A 100 mm panel with mineral wool can appear in many projects, but there is no single common set of parameters. Cores, facings and joints vary. Before purchase, it is worth checking the entire wall solution. Particularly important are the support spacing, openings and the thermal and fire requirements adopted for the building. In an example wall family, a 100 mm panel has a mass of approximately 19.8 kg/m² and a Uc of approximately 0.41 W/(m²·K). Another version of the same thickness may weigh approximately 17.8 kg/m² and have a Uc of approximately 0.40. The data must be linked to the exact facings and product construction.

By |2026-11-14T09:32:40+01:002024-05-31|Technology and applications|Comments Off on What needs to be checked before choosing an insulated wall panel with 100 mm mineral wool?

How do you convert EPS to PIR without confusing thickness with thermal performance?

A centimetre of EPS does not provide the same thermal resistance as a centimetre of any PIR board. The comparison must be based on the lambda value of the specific material. The whole wall build-up and its finish are then checked. A thinner layer may make the reveal detail easier to resolve, but the difference in thickness alone does not determine the choice. First read the lambda value of both products under consideration. Do not assume a single figure for all EPS or for the entire PIR group. Properties depend on the variant. A board with a metallised facing may have a different application and parameter from a board intended for plaster.

By |2026-11-14T09:33:32+01:002024-05-31|Technology and applications|Comments Off on How do you convert EPS to PIR without confusing thickness with thermal performance?

Renovating a flat roof with Eurothane Silver: when details need changing

Insulating a flat roof may require raising the flashings and adjusting the position of the outlets. Eurothane Silver should be selected after these constraints have been assessed. First, it must also be checked whether the old layers are dry and whether they can serve as a substrate for the new build-up. Recticel Eurothane Silver is a PIR board with multi-layer gas-tight foil on both sides and a printed grid. The current data sheet specifies it for flat roofs in a classic build-up. During the pre-renovation inspection, examine the classic flat roof for which mechanical fixing, bonding or ballasting is being considered. Eurothane Silver must be assigned to a specific mechanically fixed, bonded or ballasted system before the scope of demolition is determined and the old roof construction is prepared.

By |2026-11-16T00:10:45+01:002024-05-28|Technology and applications|Comments Off on Renovating a flat roof with Eurothane Silver: when details need changing

Choosing one supplier for sandwich panels and sheet metal

A large selection of material only helps if you can assemble your own building from it. With panels and sheets, matching dimensions, accessories and efficient delivery are important. The size of the warehouse does not answer all these questions. A supplier is worth assessing against a specific schedule, not just the number of offers. Start by dividing into walls, roof and flashings. For each group, enter the dimensions and required properties. For panels, the core, thickness and module are needed. For sheets, also the profile, steel thickness and cover width. Colour without the type of coating does not complete the material description.

By |2026-11-14T11:59:55+01:002024-05-25|Technology and applications|Comments Off on Choosing one supplier for sandwich panels and sheet metal

Fibre cement roof ridge. Selection of fittings and ventilation

The ridge looks like a narrow strip at the top of the roof, but it combines several important functions. It covers the junction between the roof slopes, takes up water driven in by the wind and can provide an outlet for air from beneath the covering. Fibre cement sheets require a compatible set of fittings and fastenings here. Asbestos-free fibre cement does not form a complete roof without the correct termination. Choosing a ridge tile by colour alone overlooks the factors that determine tightness and moisture beneath the covering. The type of ridge element depends on the roof pitch and the way the two sides are joined. Some solutions have a defined adjustment range, others require the correct angle. This range is not, however, the permissible pitch of the covering itself.

By |2026-11-15T17:20:43+01:002024-05-17|Technology and applications|Comments Off on Fibre cement roof ridge. Selection of fittings and ventilation

Replacing the roof covering with Powerroof: retaining the finished loft interior

A finished attic is a strong argument for carrying out part of the work from the outside. Powerroof can make this type of thermal insulation possible, but not always without changes to details. Before renovation, access, weather, the condition of the timber and the possibility of closing the roof tightly must be checked. Recticel Powerroof is a PIR board for above-rafter thermal insulation of pitched roofs. It has an aluminium facing and a tongue-and-groove joint on all four edges. During the pre-renovation inspection, check the above-rafter Powerroof layer running over the timber structure of the pitched roof slope. Powerroof must be run over the rafters while ensuring proper fixing of the entire covering before determining the scope of demolition and preparing the old building envelope. The new surface does not solve everything: continuous insulation does not replace the elements that transfer forces from the covering to the structure.

By |2026-11-16T00:10:46+01:002024-05-11|Technology and applications|Comments Off on Replacing the roof covering with Powerroof: retaining the finished loft interior

Metal roofing and energy use: what difference does the insulation make?

The metal sheet alone does not determine energy use – the whole roof assembly matters, not just its outer layer. Before renovating, check whether the insulation sits in a separate layer or forms the core of a sandwich panel, as these are different systems. Compare the existing thermal resistance with the designed one, including thermal bridges and joint airtightness. Choosing a material with lower lambda may reduce insulation thickness, but it does not guarantee specific savings. Leave the scope of works to the designer.

By |2026-11-14T22:25:57+01:002024-04-29|Technology and applications|Comments Off on Metal roofing and energy use: what difference does the insulation make?

Tile-effect metal sheets or concrete roof tiles? Comparing cost and weight

Choose the covering based on the permissible load on the roof structure and the actual scope of work, not just the price per metre of material. Check whether the structure can carry the weight of concrete tiles, especially during renovation, where existing sheet metal does not guarantee a reserve. Compare the mass of the finished covering surface, the fixing method, waste and accessories. In the contractor's offer, look at demolition, roof structure repairs, battens, flashings and transport. In strong winds, the complete fixing system matters, not weight alone. Leave the final choice to the designer, as roof geometry and timber condition are decisive.

By |2026-11-14T18:54:49+01:002024-04-26|Technology and applications|Comments Off on Tile-effect metal sheets or concrete roof tiles? Comparing cost and weight
Back to top