About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

Can trapezoidal steel roofing suit a traditional house?

Trapezoidal metal sheeting can suit a traditional house if its profile, colour and details match the building's proportions. Before ordering the material, check local rules on roof appearance, as these may determine the permitted options. Assess the whole covering together with the eaves, gutters and façade, not just the sheet itself. The choice of profile, such as T18 or T35, must first meet technical requirements; only among those options should appearance be decided. Consistency of details is key.

By |2026-11-14T18:53:51+01:002025-07-24|Technology and applications|Comments Off on Can trapezoidal steel roofing suit a traditional house?

What dimensions should I provide when ordering tile-effect metal roofing cut to length?

An order for tile-effect metal roofing cut to length should be based on measurements of the finished structure. The roof area from the design is a good starting point but does not replace actual dimensions. The most important are the lengths of the slopes, the widths and the diagonals. To these must be added the position of openings and the agreed terminations at the eaves and ridge. Record the length of the eaves and ridge and both side edges. Check the diagonals. If the roof slope is not a rectangle, length and width alone do not describe its shape. On a hipped roof, mark each section separately. Do not assume that symmetrical elements in the design have identical dimensions once built.

By |2026-11-14T09:31:40+01:002025-07-16|Technology and applications|Comments Off on What dimensions should I provide when ordering tile-effect metal roofing cut to length?

Fibre cement corrugation geometry: pitch, height and width

Seen from a distance, a corrugated sheet looks like a simple product. Only when two cross-sections are compared do the differences become apparent. The spacing of the crests, the wave height or the design of the side edge may differ. Fibre cement sheets are therefore selected on the basis of the drawing and the documentation. The term asbestos-free fibre cement states the type of material but does not describe its geometry. That geometry determines how the sheets are joined, which accessories are used and how the surface area can be used. The pitch is the distance between corresponding points on successive waves, for example between crests. The width of the recess itself should not be measured and the result treated as this dimension. In a technical drawing the pitch has its own dimension line.

By |2026-11-15T17:20:20+01:002025-07-14|Technology and applications|Comments Off on Fibre cement corrugation geometry: pitch, height and width

Why a floor slab cannot replace the foundations and anchors of a steel building

A lightweight frame does not mean that a steel hall can be placed on any concrete surface. The columns transfer concentrated forces to the ground, and wind can also cause uplift effects. The foundation, anchor bolts and column base must work as a coordinated system. An industrial floor slab has a different primary role and does not automatically replace this solution. The foundation transfers the effects from the steel structure to the ground. The floor slab serves, among other things, to take service loads inside, such as vehicle traffic or storage. Both elements can be linked in the design, but such interaction must not be assumed without calculations. The thickness of an existing concrete slab alone does not confirm that a column can be placed on it.

By |2026-11-15T02:36:01+01:002025-07-10|Technology and applications|Comments Off on Why a floor slab cannot replace the foundations and anchors of a steel building

PIR or EPS roof insulation: what fits at the existing eaves?

When replacing a roof, the choice of core is often determined by the space at the eaves, windows and penetrations. PIR and EPS panels may require a different thickness for a similar thermal target. It is worth comparing full cross-sections. The profile height, the method of support and the fit of the new covering to the existing edges also matter. Start with the cross-section at the eaves and ridge. Record the level of the supports, the space for flashings and the position of existing openings. For an extension, check the height below the sill or window of the old building. The new roof must fit together with the required pitch.

By |2026-11-14T12:01:41+01:002025-07-10|Technology and applications|Comments Off on PIR or EPS roof insulation: what fits at the existing eaves?

Roof renovation with SOPREMA PIR boards: find the moisture source first

During the renovation, a damp area was uncovered next to the skylight, although the BLUE A field appears undamaged. The path by which moisture is entering and the condition of the adjacent layers must be established. Simply covering the spot with new PIR does not explain the cause. The repair detail should reinstate every required layer, not only the visible board. In a renovation, a scope described as an entire roof assembly, including the vapour control layer, insulation and outer covering requires an investigation of the old layers. The first difficult place to inspect is the junction between the vapour control layer and the skylight upstand. It is not worth determining the thickness of EFYOS BLUE A solely on the basis of an old drawing. The survey should cover the position of all layers at the base of the skylight, taking into account changes made during earlier work.

By |2026-11-16T00:11:06+01:002025-07-05|Technology and applications|Comments Off on Roof renovation with SOPREMA PIR boards: find the moisture source first

Why two similar corrugated profiles do not necessarily fit together

Two grey sheets can look almost identical and yet fail to form a correct joint. When buying for a roof repair, this difference matters a great deal. Fibre cement sheets must be compared by section, working dimensions and fixing rules. Asbestos-free eternit is a general name. It does not mean a single edge standard or a common set of accessories. Compatibility is determined by details that are easy to overlook in a photo. The most misleading factors are similar colour and a similar number of ridges. The perspective of the photograph further changes the proportions. A narrow corrugation photographed from the side can resemble a wider one. That is why a discussion of interchangeability should begin with the designation and drawing, not with a photo taken from the yard.

By |2026-11-15T17:20:22+01:002025-07-05|Technology and applications|Comments Off on Why two similar corrugated profiles do not necessarily fit together

What causes complaints about roofing materials?

Complaints about roofing materials usually stem from a mismatch between what was ordered and what was delivered, and from how the material was handled on site. Before approving an order, compare the full specification with the design: thickness, coating, gloss and profile, and for sandwich panels also the core, facings and fixing method. Establish the external face and the lengths of elements, since the phrase “graphite sheet” alone settles none of this. On delivery, inspect the packaging, corners and accessible edges, and check the number of elements against the documents. Recording delivery, unpacking and installation dates also limits later disputes.

By |2026-11-14T18:55:50+01:002025-07-02|Technology and applications|Comments Off on What causes complaints about roofing materials?

Choosing a metal picket fence for your home

Think about where privacy matters before choosing a metal picket fence. Marking the boundary, sheltering a patio from view and screening the house from the road may call for different heights, gaps and arrangements on one or both sides of the rails. Look at a sample from an angle as well as straight on. Closer pickets can block more of the view, but they also affect daylight, airflow and wind loading. The posts and foundations need to suit the finished fence panel as a whole.

By |2026-11-14T22:28:40+01:002025-06-24|Technology and applications|Comments Off on Choosing a metal picket fence for your home

When to buy first-quality panels and when to consider outlet stock

The outlet can offer savings if its dimensions and condition suit the project. However, not every cheaper batch is suitable for every wall. The most important factors are the reason for the reduction and whether the material can be inspected. First-grade and off-spec batches should be compared at the level of the finished cladding, taking waste into account. First-grade refers to a product that meets the manufacturer's specified requirements. The outlet may include surplus stock, end-of-series runs or off-spec material. The name alone does not define the type of defect or its significance. Not all such offers should be treated as a single technical category.

By |2026-11-14T11:59:57+01:002025-06-05|Technology and applications|Comments Off on When to buy first-quality panels and when to consider outlet stock
Back to top