About PiVi

This author has not yet filled in any details.
So far PiVi has created 1503 blog entries.

How to choose a durable external window sill

Follow the water from the glazing, down the frame and across the sill when choosing an external window sill. A suitable outward fall, a drip edge clear of the façade and a sound junction with the window matter more to durability than the colour or finish. Select the coating once these details have been settled. On a refurbishment, lift the old sill and inspect what supported it. An uneven or poorly formed base may let water reach the wall long before a stain appears on the visible surface.

By |2026-11-14T22:28:41+01:002023-09-21|Technology and applications|Comments Off on How to choose a durable external window sill

BauderPIR FA-TE in terrace renovation with a low threshold

After the terrace surface has been removed, an uneven substrate and limited height at the doors are revealed. FA-TE should not be ordered solely on the basis of the thickness of the old material. The cross-section must be reconstructed together with the drainage. Only then can it be assessed which elements can remain and which need to be replaced. In a renovation, the scope described as insulating the terrace above a room requires an investigation of the old layers. The first difficult point to inspect is the threshold of the terrace doors and the nearby drain. It is not advisable to determine the thickness of BauderPIR FA-TE solely on the basis of an old drawing. The measurement should cover the distance between the substrate and the permissible surface level, taking into account changes made during earlier works.

By |2026-11-16T00:11:18+01:002023-09-18|Technology and applications|Comments Off on BauderPIR FA-TE in terrace renovation with a low threshold

What is a roofing underlay membrane and which properties matter?

A roofing membrane is a layer under the covering that protects against water and allows water vapour to escape. When selecting its parameters, check above all the product's intended use, diffusion resistance Sd, waterproofness and mechanical strength. Grammage alone is not enough for assessment. The key decision variable is compatibility with the temperature under the covering, the type of substrate and the planned installation time. Remember that the membrane does not replace the metal sheet or the internal airtight layer, and its strips and joints must form a continuous layer.

By |2026-11-14T22:28:58+01:002023-09-16|Technology and applications|Comments Off on What is a roofing underlay membrane and which properties matter?

Which roof covering suits your house?

Choose the covering to suit the roof pitch, the building structure and the way the building is used. Tile-effect metal roofing, trapezoidal steel sheet and insulated sandwich panels serve different functions. What matters is the cost of the whole roof build-up, as well as appearance, acoustics and the possibility of repair. Colour or the price of a single sheet is not enough. First check the design requirements, then compare the solutions approved for the given roof slope. Start with the pitch and dimensions of the slope. Every product has its own range of application. Tile-effect metal roofings come with different minimum pitches, so the parameter of one model does not apply to the whole group. At a low pitch, the laps, flashings and the method of water drainage become particularly important. The product data sheet and the installation instructions must be consistent with the design.

By |2026-11-14T15:39:38+01:002023-09-12|Technology and applications|Comments Off on Which roof covering suits your house?

Is metal picket fencing right for your property?

Metal pickets work well if you want a tidy fence with adjustable gaps and colour. Rather than generic claims of low maintenance, it is better to establish what role each part of the plot should play: the front, the area by the terrace and the rear garden may need different degrees of screening. Gaps change the view from both sides, and the density of the infill affects wind load. Before choosing, ask for a sample panel or a drawing of the layout to assess privacy and how it looks from the garden side.

By |2026-11-14T18:56:37+01:002023-09-11|Technology and applications|Comments Off on Is metal picket fencing right for your property?

What is a coated fence picket made of? Steel, galvanising and a colour coating

The colour of a fence picket is only the most visible part of the material. Beneath it lie the steel and the surface protection system. Each layer has its own job. Metal pickets that look alike therefore do not have to share identical parameters. The choice is best based on a specific material description rather than on the shade alone. The rear face and the conditions in which the fence will be used also matter. The coating is a protection system, not just decoration. Sheet-metal pickets are made from thin material profiled to a specific shape. The steel grade and thickness work together with the geometry of the cross-section. These determine how the element behaves once fixed. A coloured surface does not replace suitable material or proper supports. Rigidity should therefore not be judged by the name of the coating alone.

By |2026-11-15T17:18:36+01:002023-09-09|Technology and applications|Comments Off on What is a coated fence picket made of? Steel, galvanising and a colour coating

Planning a durable patio roof

Start by deciding how much of the terrace should stay dry. Covering a strip along the house takes a different arrangement of supports from sheltering the full terrace. Measure the height available at the wall and at the outside edge, allowing space for the structure and roof fall. T18 or T35 profiled sheets and insulated roof panels each need a support layout, a drainage route and a suitable wall junction. Check the design for wind, snow and anchorage, and decide how water will leave the roof and how its underside should look before ordering.

By |2026-11-14T22:26:46+01:002023-09-06|Technology and applications|Comments Off on Planning a durable patio roof

How to inspect a panel roof when extending an old building?

A panel roof can be a solution for an extension if it suits the structure and the available height. The junction with the old building is often the most difficult part. The support, water drainage and conditions at the higher wall must be checked. The low weight of the panel alone does not determine suitability. An extension requires assessment of both parts together. Check the condition of the masonry, foundations and elements to which the extension is to be connected. Cracks, moisture and previous alterations may be relevant. Render does not show the full construction of the wall. If you plan to transfer loads onto it, a survey of the substrate and a proper design are required.

By |2026-11-14T12:01:24+01:002023-09-03|Technology and applications|Comments Off on How to inspect a panel roof when extending an old building?

Mono-pitch roofs: structure, advantages and limitations

A mono-pitch roof has a single slope and directs water in a chosen direction. Before deciding to use one, check above all whether you can provide a continuous load path from the roof slope through the rafters, purlins, walls and columns down to the foundations. It is this path, not the simple roof line itself, that determines the choice of structure and covering. It is also worth thinking through the top edge detail and water drainage in advance, as these details often decide the durability of the system.

By |2026-11-14T18:56:32+01:002023-08-23|Technology and applications|Comments Off on Mono-pitch roofs: structure, advantages and limitations

How long does trapezoidal steel roofing last?

There is no single number of years that applies to every trapezoidal steel sheet. Durability depends on the steel, the coatings, the environment, the installation and subsequent inspections. T18 and T35 describe the profile, not the expected service life. It is worth comparing the documentation for the specific product and the warranty conditions. Well-executed details and prompt repair of minor damage help to make the most of the material's potential. The steel sheet is protected by layers matched to the specific product. The metallic coating protects the steel, while the organic layer provides additional protection and determines the appearance. Their parameters must be read together. The colour name alone says nothing about resistance to corrosion or radiation. Two sheets of identical shade may have different coatings and conditions of use.

By |2026-11-14T15:40:18+01:002023-08-15|Technology and applications|Comments Off on How long does trapezoidal steel roofing last?
Back to top