How to choose a durable external window sill

Follow the water from the glazing, down the frame and across the sill when choosing an external window sill. A suitable outward fall, a drip edge clear of the façade and a sound junction with the window matter more to durability than the colour or finish. Select the coating once these details have been settled. On a refurbishment, lift the old sill and inspect what supported it. An uneven or poorly formed base may let water reach the wall long before a stain appears on the visible surface.

By |2026-11-14T22:28:41+01:002023-09-21|Technology and applications|Comments Off on How to choose a durable external window sill

Which roof covering suits your house?

Choose the covering to suit the roof pitch, the building structure and the way the building is used. Tile-effect metal roofing, trapezoidal steel sheet and insulated sandwich panels serve different functions. What matters is the cost of the whole roof build-up, as well as appearance, acoustics and the possibility of repair. Colour or the price of a single sheet is not enough. First check the design requirements, then compare the solutions approved for the given roof slope. Start with the pitch and dimensions of the slope. Every product has its own range of application. Tile-effect metal roofings come with different minimum pitches, so the parameter of one model does not apply to the whole group. At a low pitch, the laps, flashings and the method of water drainage become particularly important. The product data sheet and the installation instructions must be consistent with the design.

By |2026-11-14T15:39:38+01:002023-09-12|Technology and applications|Comments Off on Which roof covering suits your house?

Planning a durable patio roof

Start by deciding how much of the terrace should stay dry. Covering a strip along the house takes a different arrangement of supports from sheltering the full terrace. Measure the height available at the wall and at the outside edge, allowing space for the structure and roof fall. T18 or T35 profiled sheets and insulated roof panels each need a support layout, a drainage route and a suitable wall junction. Check the design for wind, snow and anchorage, and decide how water will leave the roof and how its underside should look before ordering.

By |2026-11-14T22:26:46+01:002023-09-06|Technology and applications|Comments Off on Planning a durable patio roof

Mono-pitch roofs: structure, advantages and limitations

A mono-pitch roof has a single slope and directs water in a chosen direction. Before deciding to use one, check above all whether you can provide a continuous load path from the roof slope through the rafters, purlins, walls and columns down to the foundations. It is this path, not the simple roof line itself, that determines the choice of structure and covering. It is also worth thinking through the top edge detail and water drainage in advance, as these details often decide the durability of the system.

By |2026-11-14T18:56:32+01:002023-08-23|Technology and applications|Comments Off on Mono-pitch roofs: structure, advantages and limitations

How long does trapezoidal steel roofing last?

There is no single number of years that applies to every trapezoidal steel sheet. Durability depends on the steel, the coatings, the environment, the installation and subsequent inspections. T18 and T35 describe the profile, not the expected service life. It is worth comparing the documentation for the specific product and the warranty conditions. Well-executed details and prompt repair of minor damage help to make the most of the material's potential. The steel sheet is protected by layers matched to the specific product. The metallic coating protects the steel, while the organic layer provides additional protection and determines the appearance. Their parameters must be read together. The colour name alone says nothing about resistance to corrosion or radiation. Two sheets of identical shade may have different coatings and conditions of use.

By |2026-11-14T15:40:18+01:002023-08-15|Technology and applications|Comments Off on How long does trapezoidal steel roofing last?

What steel thickness should you choose for trapezoidal sheet on a specific roof?

Sheet thickness must be selected together with the profile, support spacing and roof load. There is no single figure suitable for all roof slopes. Also, a higher trapezoidal profile does not give unlimited freedom. For comparison, the data for the specific section and the thickness of the steel substrate are needed, distinguished from the complete coating system. Establish how thickness is stated in the product specification. The steel substrate and protective layers are not the same thing. Comparing a total measurement with a value relating to the steel can lead to error. A clear description of the variant and its tolerances is needed.

By |2026-11-14T12:00:33+01:002023-07-30|Technology and applications|Comments Off on What steel thickness should you choose for trapezoidal sheet on a specific roof?

How do you convert the price per 1 m² of trapezoidal steel sheet into the actual cost of the roof covering?

The price per 1 m² of trapezoidal steel sheet may refer to different bases of calculation. A cheaper rate for the total area does not necessarily mean cheaper covering. The profile, steel thickness and coating also matter. To assess the cost, you need to combine the sheet description with the layout of your own roof slope. Only then is it worth comparing discounts. The total area results from the full width of the sheet. The effective area describes the covering after the intended side lap. Both methods may appear in quotes, so the unit must be clear. You should not compare the figures alone before checking this note.

By |2026-11-14T12:00:48+01:002023-07-21|Technology and applications|Comments Off on How do you convert the price per 1 m² of trapezoidal steel sheet into the actual cost of the roof covering?

Timber roof structures: components and construction principles

The roof structure transfers the weight of the covering, snow and wind action onto the walls and supports of the building. It is formed by interacting elements, not by the rafters alone. The choice of roof truss depends on the span, the room layout and the design. Before installing the metal sheeting, the geometry of the structure, the connections and the substrate under the covering must also be checked. Each element must correspond to its function within this system. The covering transfers loads onto the battens or purlins, and these onto the subsequent load-bearing elements. In a timber roof truss, part of this work is carried out by the rafters. The forces then pass to the wall plates, purlins, posts and walls, depending on the system. The continuity of this load path is important.

By |2026-11-14T15:39:39+01:002023-07-16|Technology and applications|Comments Off on Timber roof structures: components and construction principles

What is a roof valley and how can it be kept watertight?

A roof valley is the concave junction of two roof slopes that collects water from both adjacent surfaces and must allow it to drain freely. When assessing the workmanship, it is worth checking not only the flashing itself but above all the clear flow of the channel and the distance of the sheet edge from its centre line. This distance determines the drainage cross-section and is often the source of problems. Watertightness depends on the shape of the flashing, its support and correct laps, not on the amount of sealant. Even the best sealant will not repair a badly formed detail.

By |2026-11-14T22:27:42+01:002023-07-15|Technology and applications|Comments Off on What is a roof valley and how can it be kept watertight?

When is second-quality trapezoidal steel sheet worth buying?

Second-grade trapezoidal steel sheet can lower the cost of a small covering if it has identified defects and matches in dimensions. When buying, also inspect the edges, the underside and the overlap areas. What matters most is the cost of the sheets you will actually use. A discounted batch in random lengths will not always work out cheaper. A slight difference in shade means something different from a broken coating, a deep bend or a deformed edge. Ask for the reason for the markdown. Examine the sheet in light falling along the profile. This angle helps to spot waviness and dents. Also check the surface of the underside, especially if it will be visible inside.

By |2026-11-14T15:39:20+01:002023-07-11|Technology and applications|Comments Off on When is second-quality trapezoidal steel sheet worth buying?
Back to top